3D PEN-2Pro Creative Set – Upgraded 3D Drawing Pen with Metal Motor & Type-C Power
SEE IT IN ACTION
Description
s it with Type-C.
Why does that matter?
A proprietary round power cable can be frustrating to replace if it is lost or damaged.
Type-C is far more widely available, making the pen easier to keep in use over time.
Simply use a compatible Type-C power cable that meets the required power specification.
It is a small change that makes a surprisingly big difference in everyday use.
Upgrade 2: Metal Motor for Greater Reliability
Inside the 2Pro is another important change.
The upgraded version uses a metal motor and metal drive components rather than the plastic motor construction shown for the older version.
That matters because the motor is responsible for feeding filament smoothly towards the heated nozzle.
The upgraded metal system is designed to offer:
-
Improved durability
-
Greater mechanical reliability
-
Better heat dissipation
-
More consistent filament feeding
-
Longer service life compared with the older plastic-drive design
When a 3D pen is used repeatedly, the motor is one of the components doing the hardest work.
The 2Pro strengthens exactly that part.
Upgrade 3: Redesigned Ceramic Pen Tip
The front of the pen has also been reworked.
The 2Pro uses an optimised ceramic pen tip with a rounded R-angle design.
The shape is intended to provide a clearer view of the line being drawn, so the nozzle assembly obstructs less of the working area.
That makes it easier to see:
Where the filament is landing.
Where two lines need to connect.
Where the next detail should begin.
For detailed creative work, better visibility means better control.
Upgrade 4: Less Heat Transfer Around the Grip Area
The older PEN-2 nozzle design uses visible side clips around the pen tip.
According to the 2Pro manufacturer comparison, those components can transfer more heat towards the area where the pen is held.
The 2Pro moves to a concealed fastening design, helping reduce heat transfer around the front grip section.
That does not mean the nozzle itself is cool.
This is still a high-temperature 3D drawing tool and the extrusion tip becomes hot during operation.
But the redesigned structure aims to make the area around the grip more comfortable than the previous design.
Upgrade 5: Quieter Operation
The 2Pro is also designed for lower operating noise.
The upgraded motor system helps reduce mechanical noise while filament is being fed.
That means more attention can stay on the project rather than on the mechanism inside the pen.
Stepless Speed Control
Different projects need different speeds.
A long straight line may benefit from faster extrusion.
Small details need more patience.
The 2Pro includes stepless filament-speed adjustment, allowing creators to change the output rate rather than being limited to one fixed speed.
Slow it down for:
-
Small details
-
Corners
-
Connecting pieces
-
Careful tracing
Increase the speed for:
-
Longer lines
-
Filling larger areas
-
Faster freehand drawing
The creator controls the pace.
Adjustable Temperature
Different filament materials need different working temperatures.
The built-in display and temperature controls allow the pen to be adjusted for the chosen material.
That makes the 2Pro compatible with both:
PLA
and
ABS
in standard 1.75 mm filament diameter.
The included Gravitaly starter set contains ABS filament, but compatible replacement PLA or ABS filament can be used according to the operating instructions and appropriate temperature settings.
Clear Digital Display
The integrated display lets the creator monitor the working temperature directly on the pen.
No guessing.
No hidden settings.
The selected temperature can be adjusted to suit the filament being used.
This becomes especially useful when moving between PLA and ABS.
One-Button Filament Feed & Retract
Loading and removing material is designed to stay simple.
Use the feed control to draw filament towards the nozzle.
When changing colour or finishing a project, use the reverse function to retract the filament.
That makes it easier to switch from one colour to another without manually pulling heated material through the mechanism.
From a Flat Line to a Real Object
A normal pen leaves ink behind.
The 2Pro leaves a physical line.
As heated filament exits the ceramic nozzle, it begins to cool and harden.
That allows creators to:
Trace.
Connect.
Layer.
Build upwards.
A flat drawing can gradually become something that can actually be picked up.
Start with the Included Templates
Beginners do not need to draw directly into the air on day one.
The included picture album, templates and copy board provide an easier place to begin.
Choose a shape.
Follow the outline.
Allow the filament to cool.
Then connect separate pieces together.
A complex-looking 3D object becomes a series of manageable steps.
Trace. Cool. Connect.
One of the easiest ways to learn 3D drawing is to construct an object from flat components.
For example:
Draw one side.
Draw another.
Let both cool.
Join the edges with fresh filament.
Suddenly a flat drawing has volume.
This introduces children to the basic relationship between 2D shapes and 3D structures.
Then Move Beyond the Templates
Once the controls begin to feel familiar, the templates become optional.
Create:
-
Names
-
Decorations
-
Animals
-
Buildings
-
Jewellery
-
Signs
-
Miniatures
-
Characters
-
Glasses
-
Geometric structures
-
Small models
-
Handmade gifts
The pen becomes a free-form making tool.
Build Upwards
Drawing in 3D changes the way children think about form.
A line can become a wall.
A circle can become part of a sphere.
Several flat panels can become a building.
Repeated layers can create thickness.
Children begin moving from:
“What should I draw?”
to
“How should I build this?”
That is a very different creative problem.
Creativity Meets Engineering
3D drawing sits somewhere between art and construction.
A project needs to look the way the creator imagined.
But it also needs to hold together.
That introduces simple engineering questions:
Where should the pieces connect?
Does this section need more support?
Will the structure stand?
How can two shapes be joined?
The child is not merely decorating.
They are designing.
Learn Through Trial & Error
Not every first attempt will work.
Excellent.
Maybe the wall is too thin.
Maybe two pieces do not align.
Maybe a joint needs more filament.
Fix it.
Add another layer.
Reconnect the section.
Try again.
3D drawing makes experimentation visible.
Supports Spatial Thinking
Moving from a drawing to a physical object requires children to think about:
Height.
Width.
Depth.
Angles.
Connections.
Balance.
The project exists in space rather than only on paper.
Fine Motor Control
The hand needs to guide the pen along a chosen path while controlling speed and direction.
Slow curves.
Small corners.
Joining points.
Repeated layers.
These actions encourage controlled hand movement and precision.
Hand-Eye Coordination
The creator watches the nozzle and adjusts the hand at the same time.
Where is the filament landing?
Is the line following the template?
Does the next piece line up?
That continuous feedback makes 3D drawing a highly visual hands-on activity.
Creative Problem-Solving
There is rarely only one way to build something.
A creator might:
Draw a shape flat and join it later.
Build directly upwards.
Add internal supports.
Use several separate sections.
Experiment with different techniques.
Every project becomes a small design challenge.
A Hands-On Alternative to Passive Screen Time
The 2Pro uses technology.
But the creative work happens through the hands.
There is no app controlling what to make.
No screen deciding the next level.
The creator chooses the idea and physically builds it.
Four Colours to Choose From
The 3D PEN-2Pro is available in:
Pink
Yellow
Blue
Purple
The functionality remains the same across all four versions.
Choose the colour.
Then decide what to create first.
What’s Inside?
The Gravitaly creative set includes:
1 × 3D PEN-2Pro
1 × Pen holder
1 × Type-C power cable
3 × 3 m rolls of ABS filament
9 metres of filament in total
Random included filament colours
1 × Picture album and template set
1 × Copy board
1 × Clearing needle
1 × English user manual
Everything needed to begin the first creative projects is included in the box.
Compatible with 1.75 mm PLA & ABS
The 2Pro supports standard 1.75 mm PLA and ABS filament.
That means the creative life of the pen does not finish when the starter filament runs out.
Compatible replacement filament can be added for new projects and new colour combinations.
The Pro Difference, in Simple Terms
Compared with the standard PEN-2, the 3D PEN-2Pro upgrades the parts that affect long-term usability and everyday control:
Type-C power connection
Easier to replace and more widely available than the older round power connector.
Metal motor
A more durable and reliable filament-feed mechanism than the previous plastic design.
Optimised ceramic nozzle
Designed for smoother filament output and longer service life.
Improved tip geometry
Provides a clearer view of the drawing area.
Reduced heat transfer around the grip
A redesigned concealed mounting structure helps isolate more of the nozzle heat from the front grip area.
Lower operating noise
A quieter motor system for a more comfortable creative session.
These are not decorative “Pro” labels.
They are practical hardware changes.
Product Highlights
-
Model: 3D PEN-2Pro
-
Upgraded second-generation Pro 3D drawing pen
-
Improved over the standard 3D PEN-2 design
-
Type-C power connection
-
High-reliability metal motor
-
Metal drive components
-
Optimised ceramic nozzle
-
Redesigned R-angle pen tip
-
Improved visibility around the extrusion point
-
Reduced heat transfer towards the grip area compared with the older design
-
Lower operating noise
-
Digital temperature display
-
Adjustable working temperature
-
Stepless filament-speed control
-
One-button filament feeding
-
Filament reverse/retraction function
-
Supports 1.75 mm PLA
-
Supports 1.75 mm ABS
-
Includes 9 m ABS starter filament
-
Templates included
-
Copy board included
-
Pen holder included
-
Available in Pink, Yellow, Blue and Purple
-
Designed for repeated creative projects
-
Screen-free hands-on making
Important Safety
The 3D PEN-2Pro is a high-temperature creative tool.
The ceramic extrusion nozzle becomes hot during operation.
The redesigned Pro tip helps reduce heat transfer around the grip area, but the nozzle itself must never be touched while hot.
Children should use the pen with adult supervision and according to the supplied instructions.
Always place the pen in its holder when not actively drawing.
Allow the nozzle to cool completely before handling the front section or storing the pen.
Ready to Create?
Start with a template.
Draw the first line.
Connect another.
Build upwards.
Make a mistake.
Fix it.
Try something harder.
And eventually stop thinking of it as a pen at all.
The 3D PEN-2Pro turns drawing into building — with upgraded Type-C power, a metal motor and a redesigned ceramic tip that make the Pro version a more refined evolution of the classic PEN-2.
Characteristics
3D PEN-2Pro Creative Set – Upgraded 3D Drawing Pen with Metal Motor & Type-C Power
How It Works
From the First Colourful Line to a Creation They Can Hold
Follow Gravi and the team through four simple creative steps. With a little adult guidance, the included templates and plenty of imagination, children can turn flat outlines into colourful models, decorations and original handmade creations.
1. Gravi Prepares the Creative Station
An adult places the pen in its holder, connects it to power and prepares one of the included ABS filament colours according to the instructions. Once the pen has reached the correct working temperature, the filament can be loaded and the creative session can begin. A protected, flat workspace helps keep every project comfortable and organised.
“Let’s get everything ready before our big idea takes shape!”
2. Joy Draws the First Lines
Joy starts with one of the included templates and guides the pen slowly along the outline. Instead of ordinary ink, the pen releases warm filament that quickly cools into a firm, raised line. Beginners can practise with simple shapes before moving on to more detailed designs.
“Every amazing creation begins with one colourful line!”
3. Laughter Experiments with Shape
Laughter explores what happens when lines cross, connect and build upwards. Flat parts can be created separately, allowed to cool and then carefully joined to form butterflies, buildings, decorations, characters and other three-dimensional ideas. This is where drawing becomes designing, testing and discovering.
“What happens if we connect these pieces? Let’s find out!”
4. Freedom Brings the Creation to Life
Freedom adds the final details, carefully lifts the cooled creation from the working surface and decides how it will be used or displayed. When the project is complete, an adult unloads the filament as instructed, disconnects the pen and leaves it in the holder until the nozzle has cooled completely. The finished model is now ready to display, gift or inspire the next idea.
“You imagined it, built it and made it completely your own!”
imagine & create
Let's Create!
See The 3D Printing Doogle Pen in Action
CREATIVE FREEDOM
Turn Imagination IntoSomething Real
The 3D Doodle Pen gives young creators the exciting ability to move beyond ordinary drawing and transform their ideas into objects they can actually hold. Children can trace a template, design a flat decoration or connect separate pieces to build upwards into a three-dimensional model. Every project invites them to make their own decisions about colour, shape and detail, so there is no single “correct” result to copy. From playful characters and personalised gifts to miniature buildings and imaginative inventions, each creation becomes a tangible expression of their ideas.
LEARNING THROUGH MAKING
Builds Spatial ThinkingThrough Hands-On Discovery
Creating with a 3D pen naturally introduces children to shape, structure, balance and the relationship between flat parts and three-dimensional forms. They learn to plan which pieces are needed, consider how those pieces will connect and adjust their approach when a structure needs more support. The process encourages patience, controlled hand movements and practical problem-solving without making the experience feel like a lesson. Every experiment—whether it works immediately or needs another attempt—becomes part of learning how ideas are developed, tested and improved.
SCREEN-FREE FOCUS
A Creative Activity ThatHolds Their Attention
This hands-on activity gives children a purposeful alternative to passive screen time and keeps both their imagination and their hands actively engaged. Guiding the filament, following an outline and adding small details require calm concentration, while the visible progress provides a satisfying reason to continue. Children can begin with a quick project or spend longer developing a more detailed model at their own pace. The result is meaningful creative time that feels rewarding because they finish with something original they have made themselves.
READY FOR THE FIRST PROJECT
A GiftThat Keeps Inspiring New Ideas
The set includes the essential accessories needed to begin creating: the 3D pen, holder, power cord, templates, copy board, clearing needle and three rolls of ABS filament with 9 metres of material in total. The included templates give beginners a reassuring starting point, while more confident creators can quickly progress to freehand projects and original designs. Once the starter filament has been used, the pen can continue supporting new projects with suitable compatible replacement filament. This makes it a thoughtful creative gift for older children, teenagers and artistic adults who enjoy drawing, crafting, building and experimenting.
What Parents Say
Don't just take our word for it, here is what our customers say!
Works pretty well. My 11-yr old daughter has had a lot of fun with it. Definitely hold onto the directions because neither of us can remember how to use it without them… so not intuitive/user-friendly without the directions. Easy for my daughter to handle. She has made some cute things that are quite sturdy.
This works great. My daughter loves the gift. She can make a bunch of designs with it. It is a bit pricey. But overall a good gift.
Finally a working good 3d pen, after buying two that broke easily this one actually works
Really Nice 3d pen. It is easy to use and quick to heat up. I was looking for one that would be able to make a 3d structure and this was the right choice. Slim design makes for an easy drawing experience. I’d say if you’re looking for a gift or just want to try one for yourself you’ve found the right one. I’ve only had to clean it out once and that’s because the power was turned off before the plastic was taken out.
the price seems a bit high, but the quality is much higher than the last pen i owned. It works well with PLA/ABS. I still need to test it with TPU. The slow speed is slow enough for good control. The temperature control works well. It was a bit surprising that the recommended temperatures are much lower than those for my Tornado Printer. The case comes apart easily with the supplied spudger. The head is held on by a very small screw, and a screwdriver for it is provided. I was unable to get the head off. I should watch the video. The body of the pen is much narrower, which makes it a lot easier to hold and control. Double pressing the feed button locks it on, so you get a constant extrude without having to hold the button. All in all a nice little pen to add to my tool set.
Great birthday gift. The kids have had so much fun with these and it was a great way to include the sibling in the birthday fun!
FAQ
Everything you need to know before choosing your 3D Printing Doogle Pen
What is included in the set?
The set includes one 3D drawing pen, one pen holder, one power cord, three 3-metre rolls of ABS filament, a picture album and template set, a copy board, a clearing needle and an English user manual. The included filament provides 9 metres of material in total.
What age is the 3D pen suitable for?
The recommended age is 6 years and over. Because this is a high-temperature 3D pen with a heated nozzle, close and continuous adult supervision is required during setup, use and cooling.
Does the nozzle become hot?
Yes. The pen heats ABS filament and the nozzle can reach a high temperature during operation. Children must never touch the nozzle or freshly extruded material, and the pen should always be placed in its holder when it is not actively being used.
What type of filament does the pen use?
The pen is designed for compatible ABS filament. Always check that replacement filament is suitable for this specific pen and follow the supplied instructions when loading, changing or unloading material.
Which filament colours are included?
The set includes three rolls of colourful ABS filament, each measuring approximately 3 metres. The exact colours are selected at random and may differ from the product photography.
Can beginners use the pen?
Yes. Beginners can start by tracing the included templates on the copy board and practising with simple outlines and flat shapes. As their confidence and control improve, they can begin joining separate pieces and experimenting with original three-dimensional designs.
Is adult supervision necessary?
Yes. An adult should prepare the workspace, connect the pen, supervise the entire activity and handle storage after use. The heated nozzle, power connection and small accessories make this an activity that should never be used unsupervised.